Wissensdatenbank
Digital Devices > Digital Devices Support > Wissensdatenbank

Suchbegriff(e)


Supermicro Mainboard

Lösung

If cards not detected on supermicro boards and all LED on the Digital Devices card are blinking, then try following:

Open the BIOS of the Mainboard and navigate to:

Advanced > PCIe/PCI/PnP Configuration > PCI(e) Latency Timer

The standard value should be in the most cases 32 cycles. If you have detection problems on a big number of cards, try to raise up this value step by step.

Also the setting:

Advanced > Chipset Configuration > System Agent Configuration > PEG Port Configuration

Set the slots to PCIe-GEN1 - The cards have now a longer time to answer at the detection procedure (I²C)

 

 
War dieser Artikel hilfreich? ja / nein
Artikeldetails
Artikel-ID: 172
Kategorie: Motherboard
Datum (erstellt): 19-04-2017 09:45:57
Aufrufe: 210
Bewertung (Stimmen): Artikel wurde noch nicht bewertet (0)

 
« Zurück